Humidor Capacity Calculator Start with a swift estimate or open the bonnet for full engineering detail. Quick Advanced Request a Private Consultation Explore the Process Print / Save PDF Copy Shareable Link Units Inches Millimetres Quick Estimate Dimensions are Internal External (assumes 0.75" / 19 mm walls + 25 mm lid headroom) Internal Length in Internal Width in Internal Height in Vitola (or choose Custom) Custom Robusto — 50×5" Toro — 50×6" Churchill — 47×7" Corona — 42×5.5" Petit Corona — 40×4.5" Lancero — 38×7.5" Double Corona — 49×7.5" Gordo — 60×6" Ring gauge (1 RG = 1/64") RG Cigar length in Diameter (derived) in / mm Quick uses sensible allowances (wall/top/bottom clearances, tier gap, packing efficiency) and ignores trays/dividers for a clean estimate. Switch to Advanced to model trays, dividers and Boveda carriers. — Humidor Dimensions Internal Length in Internal Width in Internal Height in External Length in External Width in External Height in Dimension Mode Internal External Build Thickness & Headroom (External mode) Side wall thickness (each) in Top wood thickness in Bottom wood thickness in Top lid unusable headroom in Assumes +25 mm. With top/bottom at ~19 mm each, total top structure ≈ 45 mm. Operational Clearances Wall clearance (per side) in Top clearance in Bottom clearance in Inter‑tier gap in Packing efficiency Computed internal (live): — Cigar Dimensions Preset (Vitola) Ring gauge (1 RG = 1/64") RG Cigar length in Diameter (derived) in / mm Tapered heads (torpedo/belicoso) are conservative in this model—real capacity is equal or slightly higher. Compartments Include Top Tray Tray internal height in Tray floor thickness in Tray splits internal height; tray-floor thickness is deducted from the base. Top Tray — Boveda & Dividers Boveda in tray None Lay flat (footprint) Wall‑mounted on long wall Wall‑mounted on short wall Boveda preset Custom 1 × 60g pack (~5.1×3.5×0.3") Holder for 2 packs (~7.0×4.8×0.8") Holder for 4 packs (~9.5×6.0×0.9") Custom L×W×D Dividers — rows Dividers — columns Divider thickness in Base Floor — Boveda & Dividers Boveda in base Lay flat (footprint) Wall‑mounted on long wall Wall‑mounted on short wall None Boveda preset Holder for 2 packs (~7.0×4.8×0.8") 1 × 60g pack (~5.1×3.5×0.3") Holder for 4 packs (~9.5×6.0×0.9") Custom Custom L×W×D Dividers — rows Dividers — columns Divider thickness in Estimated Capacity Typical — with real‑world packing Conservative — strict grid fit Tray: — Base: — Tiers: — Best orientation: — Per‑tier area: — Internal dims used: — Show math & assumptions Copy Results Start Your Commission
